Operation X/Y/Z Motion Control Closed Loop Servo Motors Motion Type X/Y/Z Ball Screw Accuracy Ball Screw | ± .002 in. (0.0508 mm) Max Speed X/Y/Z axes 5 in. (127 mm) per second Interpolated Motion Yes | Simultaneous X, Y and Z Max Process Range 508 x 508 mm (20 x 20 in.) Min/Max PCB Size 25.2 x 25.2 to 558.5 x 609.6 mm (1 x 1 in. to 22 x 24 in.) Load Method Automatic | In-line SMEMA Solder Process Control Approach 360° | Unlimited Access to All Solder Points Nozzle Material Wetted Chromium Alloy Nozzle Sizes (ID) 1.5, 2, 2.5, 3, 4, 5, 8, 10, 20 mm & custom Keep-away 1.5 mm (0.159 in.) Standard 0.5 mm (0.19 in.) Capable Max Wave Height 6 mm (0.236 in.) Standing Wave Height Component Max Height 76.2 mm (3 in.) | Top & Bottom of PCB Flux Process Control Spray Fluxer 6-20 mm (0.236-0.787 in.) No Solids Content Limitation Drop Jet Fluxer 0.5-2 mm (0.196-0.059 in.) 14% Solids Max Dual Fluxers / Chemistry* Two Independent Nozzles & Plumbing Flux Capacity 1 Liter (0.264 gals.) Pressurized (per tank) Solder Pot Management Solder Pot Capacity 11.4 kg | 25 lbs. Temp Control PID proportioning (0-400°C) ± 2°C Pump Style Electromagnetic Pump Heat Time 50 Minutes Dross Production 42.52 grams (<1.5 oz.) per 8 Hours Maintenance Cycle NA Nitrogen Management N 2 Inertion Hentec ProHeat™ N 2 Temp Control 0-400 °C Closed Loop Set Point Consumption | Purity 1.13 M 3 /hour (40 CFH) @ <10 PPM O 2 Physical Safety UL and CE Compliant Dimensions 3429 x 1524 x 1524 mm (135 x 60 x 60 in.) Weight 1088 kg (2,400 lbs.) Ship Weight 1570 kg (3,400 lbs.) Electrical 208-240 VAC | 3-PH 3 Wire / 30 Amp Air (CDA) 80 PSI Nitrogen <10 PPM O 2 | 1.1 M 3 /hour (40 SCFH) Exhaust <8.4 M 3 /hour (<5 SCFM) |
